What each of the seven buttons does with a short and a long press — and where the screen takes touches — on the home screen, in menus, in windows and on every working screen.
The seven buttons are touch areas on the frame: a short press is a short touch; a long press is a touch held for about half a second. Holding a button never repeats it — one touch, one step. Where the buttons are: The panel and its seven buttons.
Home screen — monitoring
Button
What it does
“HOME”
Seeding table.
“HOME”, long
Locks or unlocks product application (machines with dispenser motors or a liquid pump). One short beep.
“MENU”
Main menu.
“MENU”, long
Sensor setup mode.
“PLUS” / “MINUS”
First press selects a rate field (it blinks); the next ones raise or lower its set value.
“UP” / “DOWN”
Previous / next rate field. Nothing if there is only one.
“BACK”
Releases a blinking rate field; otherwise opens the tramline bout menu, if the tramline is on.
“BACK”, long
While seeding: sets the alarm level from the flow applied — Set the alarm level.
Home screen — sensor setup mode
Button
What it does
“UP” / “DOWN”
Previous / next device.
“PLUS” / “MINUS”
Takes the selected sensor into / out of control, after a question the first time.
“MENU”
Context menu of the selected device.
“BACK”
Leaves the mode.
“HOME”
Leaves the mode and goes to the Seeding table.
Seeding table
Button
What it does
“PLUS” / “MINUS”
Next / previous table.
“UP” / “DOWN”
Scroll one row.
“MENU”
Asks “Zero readings?”.
“HOME” / “BACK”
Statistics / home screen.
Statistics
Button
Touch
What it does
“UP” / “DOWN”
Swipe down / up
Scroll one line.
“PLUS” / “MINUS”
Two-finger swipe right / left
Next / previous field.
“MENU”
Two-finger tap
Menu of the screen.
“HOME”
Long swipe left
Motors, or the rate control screen.
“BACK”
—
Home screen.
Motors
Button
What it does
“MENU”, long
Switches on the selection.
“UP” / “DOWN”
Previous / next motor or actuator.
“PLUS” / “MINUS”
Into / out of control, after a question the first time.
“MENU”
Context menu of the selected motor.
“BACK”
Leaves the selection; then the home screen.
“HOME”
Rate control screen.
Rate control
Button
What it does
“HOME”
Home screen.
“HOME”, long
Locks or unlocks product application.
“PLUS” / “MINUS”
Rate change state; then change the selected target.
“MENU”, long
Sensor setup state.
“UP” / “DOWN”
Previous / next element in either state.
“MENU”
Context menu of the selected element; on a product, its motors.
“BACK”
Leaves the state. Does not leave the screen.
Touch and hold
On the settings symbol: main menu. On a product: its motors. On liquid fertilizer: the pump.
Menus
Button or touch
What it does
“UP” / “DOWN”
Move the selection; at the end it jumps to the other end.
“PLUS” / “MINUS”
Change the value of the selected item by one step.
“MENU”
Enters the item; on a value between -[ and ]+, opens the number pad.
“BACK”
One level up.
Touch an item
Selects it; a second touch enters it.
Number pad
Touch the digits. “OK” or “MENU” accepts; “BACK” cancels. Touch and hold the backspace to clear the number. Nothing else works. See The number pad.
Windows
Window
Buttons
Question
The two buttons named in the window, or touch “Yes” / “No”. “BACK” or a touch outside cancels.
Information
Closes by itself, with a touch or with a button.
Alarm
“HOME” or touch “Close” — closes. “HOME”, long — closes and returns to the home screen. Other buttons do nothing.
Fill the disks
Only “BACK”: aborts, or closes when done.
Something your machine does that this page does not answer? Write to support@agriwelt.com — an engineer answers.