Lock product application by hand
Stop the dispenser motors and the liquid pump with one long press, so that nothing turns while you work on the machine — and how the panel shows the lock.
On a machine with dispenser electric motors, fertilizer motors or a liquid fertilizer pump, you can lock product application by hand. While it is locked, no dispenser motor turns, the pump stands still, and the panel expects no application: alarms about a rate that is too low do not occur. Use it whenever you work on the metering units, or to cross a field without sowing.
On the home screen or on the rate control screen, hold “HOME” until the panel gives one short beep.
Check the lock. On the home screen a yellow motor symbol blinks in the column at the right; on the rate control screen the hand at the bottom left turns yellow.
The work pause hand: dark grey while working, yellow while locked. To release the lock, hold “HOME” again. One short beep; the symbol stops blinking and application resumes.
On every other machine the long press does nothing and the hand stays dark grey.
On the Motors screen a locked motor shows a yellow STOP — see The Motors screen. > NOTE > > On a bench with speed imitation and dispenser motors, the panel starts with application locked and the imitated speed stays at 0. Only releasing the lock with “HOME” starts the imitated travel.
Something your machine does that this page does not answer? Write to support@agriwelt.com — an engineer answers.