Save and load settings
Keep a copy of all the settings of the current profile in the panel or on a memory card, and bring it back — for example to move one panel between implements.
For the current profile the panel can save all the settings and restore them later — useful before you try something out. With a memory card in the slot, a profile can also be saved to the card together with its settings, so one panel can serve several implements.
| Item in the “Profile” menu | What it does |
|---|---|
| “Save settings” / “Load settings” | Keep a copy of the settings inside the panel, and bring it back. |
| “Save to SD-card” / “Load from SD-card” | The same with the memory card; the profile travels with its settings. Without a card, saving ends with “Insert SD-card”. |
At the “Service” level the menu also holds “Save factory defaults”: after “Are you sure?” it saves the settings as “Save settings” does and also keeps them, with the profile, as the panel's factory copy, which no menu item of this firmware loads back.
Raise the level (Enable the Agronomist level — choose “Service”) and open “MENU” → “Service” → “Profile” (The profile).
Scroll down to the item you need and press “MENU”. “Save settings” and “Load settings” ask “Are you sure?”.
The confirmation window. Touch “Yes”. The panel answers “Saved” or “Loaded”.
The panel confirms with “Saved”.
Profile files on the memory card
- Files are named automatically P0001.pfl and stored in the PROFILES folder of the card. You may rename a file — keep the name to eight characters, Latin letters and digits.
- “Load from SD-card” opens a list of the profiles on the card. A profile file written by one firmware version is very likely not readable by another: an incompatible profile is shown in red in that list.
Something your machine does that this page does not answer? Write to support@agriwelt.com — an engineer answers.