Lock product application by hand
Stop all product application with one long press, and start it again — what the lock does and how to see that it is on.
The manual lock stops all product application: the dispenser motors and the pump do not run, however the machine moves. Use it to cross a field already sown, to drive on the road with the implement lowered, or when you work without the speed sensor.
On the home screen, hold “HOME” until the panel beeps once.
Check the right edge of the screen. A yellow hand blinks there: application is locked.
To unlock, hold “HOME” again. One short beep; the hand disappears.
On the second home screen the same works with “HOME”, or by touching and holding the hand.
What the lock changes elsewhere
- The motor tiles on the Motors screen show a yellow STOP — serviceable, not applying.
- The pump rate indicator shows a yellow pump with STOP (Liquid fertilizer pump).
- The product application control does not start when you move off — the lock must be off for the control to start (Quick start).
- The work done while locked is counted in the statistics as Work without alarms control (Statistics).
The yellow hand is shown on machines with electric dispenser motors or a liquid fertilizer pump.
Something your machine does that this page does not answer? Write to support@agriwelt.com — an engineer answers.