About the pictures in this manual
Which pictures of this manual are still to come, why the text stands without them, and what on a bench picture belongs to the bench and not to your machine.
The screens in this manual are being shot on a Hectare 5 panel on a test bench. Until a frame is taken, its place carries the words Picture to follow. The text around it describes the screen in words — top row, right-hand column, rate field — so that every topic can be used without its picture.
The photograph of the panel is a product picture. The texts on its screen are not in English; the layout of the home screen is the same.
The words on your screen
This manual quotes every label exactly as the English panel shows it — including spellings that look unusual, such as “Factical” and “Setuped” on the Statistics screen, or ks/Ha for thousands of seeds per hectare. Look for the words as printed here.
What belongs to the bench
A bench panel shows a few things your panel will not. When the frames arrive, read them with this table.
| What you see in a picture | Why it is there | What your panel shows instead |
|---|---|---|
| A blue time in the clock slot, then TRIAL, then blank | The bench panel runs on a trial licence; the blue figure is the time left. | The time of day. See Clock. |
| IMITAT in yellow in the clock slot | The bench runs in an imitation mode of the service menu. | The time of day. |
| A yellow speed figure, or IMITATION in the speed field | The speed is simulated, not measured — there is no wheel turning on a bench. | The measured speed in white. See Speed. |
| Columns that move although the machine stands still | The seed flow is imitated on the bench. | Columns that move only while seeding. |
| Red hoppers, a red oil can or battery | The bench has no product and no engine. | Green icons while everything is in order. |
| A red actuator symbol in the right-hand column | Actuators named in the bench profile are not fitted, so the panel reports them as faulty. | Nothing — the symbol is not shown while every actuator is in order. See Actuator failure. |
| A red × in place of an icon | A device named in the bench profile is not connected. | The icon of the device. |
| Zeros on the Statistics screen | The bench statistics were empty when the frame was taken. | Your figures. |
Something your machine does that this page does not answer? Write to support@agriwelt.com — an engineer answers.