The Motors screen
The dispenser electric motors and the tramline actuators of the machine, one tile each — how to read a tile and how to reach a motor's settings.
The Motors screen shows the dispenser electric motors of the machine, one tile each, and the tramline actuators if the machine has any. Look here when a row stops sowing and you want to know whether the motor is the reason.
It exists on any machine whose profile holds at least one electric motor or one tramline actuator. Reach it from the Statistics screen with a long swipe to the left. Leave it with a long swipe to the left to the home screen, or a long swipe to the right back to Statistics.
- Motor 1, STOP. Yellow, blinking — the motor is serviceable, but product application is not running.
- Value of motor 1. The driven shaft speed in rpm.
- Motor 2, red ×. No connection to this motor.
- XXX. No value, because the motor does not answer.
Reading a tile
The colour of the symbol is the state. The value beside it is the driven shaft speed in rpm. On the second home screen the same tiles show, in the “Precise” control mode, the seeds per metre measured by the seed sensor of that row.
| Symbol | Value | State |
|---|---|---|
| Motor, green | the figure | Normal. The motor is under control and driven. |
| STOP, yellow, blinking against the motor | the figure | The motor is serviceable, but product application is switched off. Nothing is wrong with it — the system is simply not applying. |
| Motor, red | the figure | The motor is in an alarm state. Read the alarm for the reason. |
| ×, red | XXX | No connection. Check the cable and the connector first. |
| !, outlined | !!! | The motor is taken out of control. It is neither driven nor watched. |
Tramline actuators
| Actuator symbol | State |
|---|---|
| Pulled in or pulled out, green | The actuator has reached its position. |
| Pulled in or pulled out, yellow | The actuator is moving to that position. |
| Alternating between in and out, yellow | The panel cannot tell the actuator's position. |
| Blinking red | The actuator is in an alarm state. |
| Blinking red × or ? | No connection, or a device of the wrong kind. |
| Blinking white | The actuator is taken out of control. |
Working with the screen
| What you want | Gesture |
|---|---|
| The settings of one motor or actuator | Touch and hold its tile |
| Back to the Statistics screen | Long swipe right |
| On to the home screen | Long swipe left |
The touch and hold opens the context menu of the motor you pressed. Its “Information” item shows the motor's state, and for a controller fault the code of the last fault. Here you see every motor of the machine at once and can choose the one that misbehaves.
Something your machine does that this page does not answer? Write to support@agriwelt.com — an engineer answers.