Setting up
Tramline actuator
The two parameters of the tramline actuator, where the rest of its settings live, and what its status screen shows.
The tramline actuator shuts the sections of the tramline bout. It has two parameters of its own, in its context menu — touch and hold its tile on the Motors screen (Sensor settings):
| Parameter | Values | Level |
|---|---|---|
| “Cutoff position” | “Pulled out” / “Pulled in” — the position of the actuator in which its sections are shut off. Default “Pulled out”. | Agronomist |
| “Switch” | “when seeding” / “always” — when the actuator is switched. Default “when seeding”. | Agronomist |
The rest of its settings live elsewhere:
| What | Where |
|---|---|
| The address and the marker channels of its controller | Configure a tramline actuator controller |
| The rhythm — which bout shuts which actuator | Set up the tramline rhythm |
| Which sections belong to the actuator | “Relation of sensors to actuators” — Seeding machine parameters |
The status screen of the actuator shows Status: Pulled in, Pulled out, Working while the shutter is moving, or Unknown. Alarms: Tramline alarms.
Something your machine does that this page does not answer? Write to support@agriwelt.com — an engineer answers.